Full bore valve specification means that the orifice diameter of the valve is not limited in the pipeline. Then, standard (reduced diameter) port valves can result in restricted flow, which can lead to cavitation and pressure loss. Another reason to use f
Gate valves are typically used in older piping systems and in applications that do not require frequent shutoff. Large water supply lines use gate valves because they have a straight flow path and less flow restriction.
Ball valves are increasingly used in newer piping systems that require frequent shutoffs.
Gate valves are used in slurry and viscous media applications because they are easier to clean and maintain. Ball valves are undesirable because they are difficult to clean and mud particles can damage the rotating ball.
Gate valves are used in high-temperature and high-pressure environments such as power plants, mines, and water treatment.
Ball valves are typically used in fire protection systems and marine applications. They are best avoided in food, beverage and pharmaceutical applications because ball valves are difficult to clean and can cause contamination.
Gate valves are one of the top valves commonly used in industrial applications, but due to their design, these valves are prone to wear and damage.
Gate valves are one of the most commonly used valves in pipeline applications. Gate valves control the flow of water by raising or lowering the inner gate using a twist-type handle or knob located at the top of the valve.
Gate valves are very reliable in shutting off the water supply and they are commonly used as shutoff valves for main and branch water lines, although ball valves are becoming increasingly popular for these applications.
A ball valve is a globe valve that controls the flow of a liquid or gas by means of a rotating ball with an internal bore.
Gate valves are typically used in older piping systems and in applications that do not require frequent shutoff. Large water supply lines use gate valves because they have a straight flow path and less flow restriction. Ball valves are increasingly used i
Ball valves are typically used in fire protection systems and marine applications. They are best avoided in food, beverage and pharmaceutical applications because ball valves are difficult to clean and can lead to contamination.
Gate valves have a shut-off/closing mechanism. There is an upward internal gate mechanism that allows media flow and closes the valve downward.
Gate valves are not suitable for throttling volumes. Due to the design of the valve, a partially open gate with fluid flow can cause severe damage to the valve, so flow control is difficult.
Traditional globe valves are available for isolation and throttling service. Although these valves have a slightly higher pressure drop than straight-through valves (e.g., gate, plug, ball, etc.), they can be used in situations where the pressure drop thr
A globe valve consists of a circular orifice, usually with its axis at right angles to the pipe axis, to which a piston or disc sealer provides a seal.
